SEMO SmartHomes
Battery Powered Video Doorbell Camera & Wireless Chime
Battery Powered Video Doorbell Camera & Wireless Chime
Couldn't load pickup availability
Overview
The Alarm.com Wireless Video Doorbell is a battery-powered doorbell camera that features HD video, Video Analytics for rapid people detection, Two-Way Audio, a wide field of view, and a rechargeable battery.
This completely wireless video doorbell gives you the flexibility to choose the perfect installation location without depending on the existing wiring or chime. The VDB780B must be connected over Wi-Fi to the Alarm.com Smart Chime (ADC-W115C).
Key features
- Completely wireless installation
- Rechargeable (micro USB) battery pack
- Optimized for battery life that is expected to last up to six months
- Advanced motion detection provides increased awareness with timely alerts
- Two-Way Audio through the mobile app
- Installation flexibility for optimal viewing
- 160º horizontal FOV
- Full HD 1080p recording
- Wi-Fi connection to the Alarm.com Smart Chime (ADC-W115C) (sold separately) required
Included accessories
- Charging cable
- Mounting plate
- Mounting screws and anchors
- Installation guide
- 10º tilt wedge
Specifications
| Recording compression | H.264 |
|---|---|
| Ingress protection | IP66 |
| Max resolution | 1920x1080 |
| Image sensor | 2.12 MP - 1080p, Sony IMX323 ABRcontrol support and MJPEG |
| Lens/angle of view | 160° horizontal, 90° vertical, 175° diagonal |
| Low-light sensitivity | 0.5 lux with IR LED off |
| IR range | Up to 15 feet (5 meters) |
| Image adjustments | Flip, brightness, contrast, saturation, sharpness, exposure |
| Wi-Fi connectivity | 802.11 b/g/n, 2.4 GHz |
| Operating and storage temperatures | -4°F to 122°F (-20°C to 50°C) |
| Operating humidity | 20% to 100% (non-condensing) |
| Dimensions | (W x L x D) 2.5 x 5.3 x 1.2”(64 x 134 x 30 mm); mounting bracket adds 0.2” (6 mm) to depth |
| Motion sensor | Passive infrared sensor |
| Battery pack capacity | 9540mAh nominal capacity |
| Charging requirement | 5V/1.5A charger |
| Charging time | Up to 7 hours |
| Speaker | 1W, 8Ω speaker |
| Microphone | Single, omni-directional, analog, >-40dBV/Pa |
For Internet service and bandwidth requirements, see What are the internet service and bandwidth requirements for Alarm.com video devices?.
For information about frame rate (FPS), see What is the frame rate for video?.
LED guide
- Top LED
- Button LED
.png?revision=2)
Button light guide
Operational States
| Mode | Description | Button LED behavior |
|---|---|---|
| Standby or off |
The camera is in standby mode (normal operation) or the battery is drained and requires recharging. |
Off
|
| Local connection |
The camera has a local network connection. |
Solid green
|
| No local connection |
The camera does not have a local network connection. |
Solid red
|
| Low battery |
The camera's battery is low and requires a recharge. |
Alternating red and blue
|
| Connecting to network |
The camera is powered on and connecting to the network. |
Blinking red
|
| WPS mode |
The camera is in WPS pairing mode. To enter this mode, press and hold the button for 30-45 seconds. |
Blinking blue
|
| AP mode |
The camera is in AP pairing mode. To enter this mode, press and hold the button for 46-60 seconds. |
Blinking white
|
| Power cycle |
The camera is being power cycled. To enter this mode, press and hold the button for 61-75 seconds. |
Blinking yellow
|
| Factory reset |
The camera resetting to factory default. To enter this mode, press and hold the button for 76-180 seconds. |
Alternating red and green
|
| Firmware upgrade |
The camera's firmware is being upgraded. |
Blinking yellow rapidly
|
| Mode description | Top LED Behavior | Button LED behavior |
|---|---|---|
|
Charging The battery pack is plugged in and charging. |
Solid orange
|
On button press Solid green =
Solid yellow =
Alternating red and blue = <20% charged
|
|
Fully charged The battery pack is fully charged. |
Solid green
|
On button press, solid green
|
|
Failure charging The battery pack stopped charging because the device was plugged in too long. This may signal that there is an issue with your battery pack. Remove the charging cabled and re-attempt charging after an hour. If you see the same behavior, please contact your provider. |
Alternating orange and green
|
Alternating red and white
|
|
Operational temperature range for charging exceeded The battery pack's internal temperature is either too hot or too cold. Please charge the battery pack in a room-temperature environment. |
Solid green or solid orange
|
Alternating red and yellow
or Alternating red and white
|
Chime Install Guide
Wireless Chime Overview
Designed to work seamlessly with the Alarm.com platform, the ADC-W115C serves as a robust Wi-Fi extender and customizable wireless doorbell chime. Add the Alarm.com Smart Chime to an account when an in-home chime is not a feasible option during a doorbell camera installation. Simply plug the ADC-W115C into a wall outlet, pair with the existing router, add a doorbell camera, and enjoy boosted network signals that provide instantaneous chime notifications.
Note: The ADC-W115C can only be used as a Wi-Fi extender for Alarm.com video devices.
Features
- Wireless doorbell chime
- Wi-Fi extender (2.4 GHz)
- Adjustable chime volume
- Customizable tones
- Simple, plug-in installation
- Remote management and troubleshooting
In the Box
- ADC-W115C Alarm.com Smart Chime
- Installation Guide
Specifications
| Wi-Fi Connection | 802.11 b/g/n, 2.4 GHz |
|---|---|
| Wi-Fi Security | WPA2 |
| LED Indicators | 4 |
| Buttons | WPS, Reset |
| Antennas | 2 |
| Wi-Fi Chime | 1.5 W speaker, 77 dB |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Operating Humidity | 10% to 90% (non-condensing) RH |
| Dimensions (H x W x D) |
With antennas 5.0 x 1.0 x 2.1” (12.7 x 13.0 x 5.4 cm) Without antennas 3.3 x 3.3 x 2.1” (8.5 x 8.5 x 5.4 cm) |
LED indicators
Power
| LED pattern | Description |
|---|---|
|
Off
|
Device powered off |
|
On
|
Device powered on |
|
Blinking
|
Device booting up |
Router
| LED pattern | Description |
|---|---|
|
Off
|
No local or Internet connection |
|
On
|
Connected to Internet |
|
Blinking
|
Local connection, no Internet |
|
Blinking (five quick blinks)
|
Communication test initiated |
Devices
| LED pattern | Description |
|---|---|
|
Off
|
No device connected to chime |
|
On
|
Device connected to chime |
|
Blinking (three quick blinks)
|
New device connected to chime |
WPS
| LED pattern | Description |
|---|---|
|
Off
|
WPS mode not enabled |
|
Blinking (slowly)
|
WPS mode enabled to connect to router |
|
Blinking (rapidly)
|
WPS mode enabled to connect to client device |
Additional states
| LED pattern | Description |
|---|---|
|
All LEDs blinking (escalating)
|
Firmware upgrade in progress |
|
All LEDs blinking (simultaneously)
|
Reset in progress |
Shipping & Returns
Shipping & Returns
Free Shipping on orders over $200
Protect Your Home & Family
When it comes to protecting what's important to you, you're the one in charge. You are the one responsible. Who else is going to do it for you? We're here to help you get started ASAP with the very best in services and equipment for your home or business with easy finance options. When you install your own system you understand it fully and will learn the full potential of it and if trouble arises you'll be able to trouble shoot and fix the problem quickly. No waiting on hold or scheduling a service call.
-
Free Shipping
Free shipping for orders over $200.